Pipeline Automation Systems, Inc.
215 Harding Way West, Galion, OH - Phone 419-462-8833, FAX 419-462-8831

CLOCK SPRING      DOT Approved for Permanent Pipeline Repairs
Composite  Sleeve Reinforcement System

  The Clock Spring System Consists of:
  1. A Patented, High Strength unidirectional Composite structure.
    2. A Patented, fast curing, high performance , two -part adhesive system.
    3. An extremely high compressive strength load transferring filler component.
Once installed, the three elements bond together to form an extraordinarily strong, durable repair.
 

This unique and patented system provides you with a superior alternative to other methods of pipeline remediation.

The Advantages of Clock Spring are:

• Safer than metal sleeves because there is no welding with chance of burn through, or creation of heat affected zones and their potential for stress corrosion.

 
• Easier and Faster than metal sleeves.  Typical installations average 30 minutes with full cure an 2 hours allowing overwrapping and backfilling in the same day

 
• Cost Less than metal sleeves and cutout and replace options.  Our customers report cost reductions of 50 to 70% over other methods previously used.

 
• No Costly Service Interruptions, or Lost Product, as they can be installed while the line is in service.

 
• Stronger Repairs. Clock Spring repairs are stronger than the original pipe allowing you to operate at your original MAOP.

 
• Better Fit than can be achieved  with metal sleeves and better load transfer because they conform to the shape of the pipe.

 
• Will Not Corrode, and Will Not Interfere with your Cathodic Protection.

 
• Versatility of Repairs for blunt corrosion and dent defects where metal loss is up to 80% of wall thickness.  Repairs can be made on straight pipe, bends, and bridge crossings.  Clock Spring can also be used as an effective  crack arrestor.

 

Other New and innovative products from Clock Spring

  SNAPWRAP for restoring low pressure systems up to 500 PSI -Fast, easy one man installation. No interuption of service, no certification for installer required
 

        PIPE SUPPORT  SYSTEMS a more effective way of protecting pipes from wear and corrosion, prvents abrasive wear, fast and easy one man installation, no certification required
 

If you would like additional information, product literature, or personal assistance, please do not hesitate to let us Know.  We can be reached at Phone # 419-462-8833, FAX 419-462-8831, or e-mail at pasngas@bright.net

OR, for additional information visit the Clock Spring Web Site , and then come back to us to discuss your specific needs